REMOTE NOZZLE RN2 & RN3

The Remote Nozzle 2 and Remote Nozzle 3 (RN2/Brokk 160 and RN3 Brokk 400D) can be attached to our triple and quad fan suction excavators, some of the most powerful in the UK, by a 250mm flexi extension hose up to distances of 150m (dependent upon material).

Versatile

Fully remote controlled makes these machines very versatile and efficient. They are operated by highly skilled and trained operatives who have the ability to manoeuvre the RN2 and RN3 into difficult areas and maximise its effectiveness. In addition, being fully remote controlled minimalizes risk by removing the operative from the hazardous area and improving his range of vision.

Remote Nozzle for Suction Excavator

Zero Emissions

This additional solution is unique to Force One Ltd and offers a range of applications. The RN2 and RN3 have been successfully used at many different sites nationwide completing the most complex excavations. Due to the RN2’s electric motor, it creates minimal noise and zero emissions making it suitable for confined spaces and indoors. However with the RN3 being Diesel powered, this offers more power and speed for the larger and more demanding job requirements.

Vacuum Excavator Remote Nozzle

Tracked Excavator

These remote units run on rubber tracks allowing them to overcome even the toughest terrain. Once in position, stabilisers are lowered raising the unit off the ground increasing its stability and securing it in place. These can then be raised allowing the remote unit to be repositioned. As these remote units run on rubber tracks, this makes them just as versatile and mobile as standard excavators but with all the benefits of a fully power arm suction excavator.

With standard suction excavators being road vehicles, these unique tracked excavator remote units are able to travel across and excavate in the most demanding conditions.

Remote Nozzle for Suction Excavator

Technical Specifications

RN2 (may vary due to configuration)

Dimensions:

  • Weight - 1600Kg (3,527 lb)
  • Width - 780mm (30.7”)
  • Height – 1254mm (49.4”)
  • Length – 2412mm (94.94”)

Specification points:

  • Arm angle – 30 Degrees (Max)
  • Slew speed – 10sec per 360 degrees
  • Transport speed – 2.3kph (1.3mph)
  • Hydraulically operated
  • No exhaust fumes (suitable for confined spaces and indoors)
  • Rubber tracked
  • Removes manual handling
  • Fully remote controlled improving the safety and accuracy of excavation (around hidden utilities)
  • Attachable extension pipes able to extract material from up to 150m from road vehicle and to depths of 3m (dependent upon material)
  • Couple with the UK’s most powerful Suction Excavator
  • Faster, safer and more efficient than conventional digging

View/Download Technical Specifications

RN3 (may vary due to configuration)

Dimensions:

  • Weight – 5500kg (12125lb exc. Attachments)
  • Width – 1600 mm (63”)
  • Height – 1975 mm (77.8”)
  • Length - 4312 mm (169.7”)

Specification points:

  • Arm angle – 30 Degrees
  • Slew speed – 20sec per 360 degrees
  • Transport speed – 3.4 kph (2.1mph)
  • Hydraulically operated
  • Diesel powered
  • Rubber tracked
  • Removes manual handling
  • Fully remote controlled improving the safety and accuracy of excavation (around hidden utilities)
  • Attachable extension pipes able to extract material from up to 150m from road vehicle and to depths of 4m (dependent upon material)
  • Couple with the UK’s most powerful Suction Excavator

View/Download Technical Specifications

© Copyright 2017 Force One Ltd | Web design by MPS Creative

Force One Limited. Company registered in England. Registration number 5293964. Registered address; 24 Longhill Road, March, Cambridgeshire. PE15 0BL